Zoeller 152-0017, Model BN152, Series Dose-Mate 150, High Head Effluent Pump W/ Piggyback Switch, 0.4 HP, 115 Volts, 1 Phase, 69 GPM, 1-1/2" NPT Discharge, 25 ft Cord, Automatic
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller BN152 Effluent Submersible Pump for Septic Tank, Low Pressure Pipe (LPP) and Enhanced Flow STEP Systems
This submersible pump is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. It includes a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance!
Features
- Durable cast iron construction
- Corrosion resistant powder coated epoxy finish
- Stainless steel lifting handle
- Assembled with stainless steel bolts
- Non-clogging engineered thermoplastic vortex impeller design
- Passes 3/4" spherical solids
- Motor - 60 Hz, 3450 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protected
- Carbon/ceramic seals
- Upper sleeve bearing and lower ball bearing running in bath of oil
- 1-1/2" NPT vertical discharge
- Includes a 25 ft variable level float switch
- Includes a stainless steel handle for easy installation and removal
- Operates at temperatures to 130°F (54°C) in effluent applications
- All models include a 1-1/2" x 2" PVC adapter fitting
- Hermetically sealed to be watertight, dust-tight, and completely submersible
The Zoeller 150 series "Dose-Mate" effluent/sump pumps are designed for high head effluent, groundwater and general dewatering applications. They can pump effluent or groundwater. The Zoeller 150 series Dose-Mate pumps are typically used in a septic tank, low pressure pipe (LPP) and an enhanced flow step system settings.
These pumps are rugged cast iron, with an epoxy powder coated finish for extra corrosion protection. The impeller is non-clogging engineered thermoplastic vortex. The upper and lower sleeve bearings run in a bath of oil, the shaft seal is made of carbon and ceramic, the bolts, screws, handle, guard, arm and seals are all stainless steel. There are no sheet metal parts to rust or corrode in the pump. The motor is 60 Hz, 1725 oil-filled and hermetically-sealed with automatic reset thermal overload protection.
Each pump can operate at water temperatures up to 130°F for effluent applications. The Zoeller 151 models come standard with a glass-filled polyproylene base and can pass up to ½” spherical solids. The Zoeller 152 and Zoeller 153 models can pass up to ¾” solids.
Automatic models include a piggyback variable float switch. All models include 1½” x 2" PVC pipe adapter fitting and a 20 ft. UL listed 3-wire power cord.
Check individual model listings to see compatible control panel options.
Zoeller 150 Series Effluent Pump |
Model Comparison Chart
Model | Discharge | HP | Volt. | Phase | GPM | Head | Type | Amps |
151-0002 | 1.5" NPT | 1/3 | 115 | 1 | 50 | 30' | Manual | 6 |
151-0004 | 1.5" NPT | 1/3 | 230 | 1 | 50 | 30' | Manual | 3.2 |
151-0005 | 1.5" NPT | 1/3 | 115 | 1 | 50 | 30' | Auto | 6 |
151-0006 | 1.5" NPT | 1/3 | 230 | 1 | 50 | 30' | Auto | 3.2 |
152-0002 | 1.5" NPT | 1/4 | 115 | 1 | 69 | 38' | Manual | 8.5 |
152-0004 | 1.5" NPT | 1/4 | 230 | 1 | 69 | 38' | Manual | 4.3 |
152-0005 | 1.5" NPT | 1/4 | 115 | 1 | 69 | 38' | Auto | 4.3 |
152-0006 | 1.5" NPT | 1/4 | 230 | 1 | 69 | 38' | Auto | 4.3 |
152-0017 | 1.5" NPT | 1/4 | 115 | 1 | 69 | 38' | Auto | 8.5 |
153-0002 | 1.5" NPT | 1/2 | 115 | 1 | 69 | 38' | Manual | 10.5 |
153-0005 | 1.5" NPT | 1/2 | 115 | 1 | 77 | 44' | Auto | 10.5 |
153-0004 | 1.5" NPT | 1/2 | 230 | 1 | 77 | 44' | Auto | 5.3 |
153-0006 | 1.5" NPT | 1/2 | 230 | 1 | 77 | 44' | Auto | 5.3 |
Performance Curve |
Dimensions |
BROCHURES |
Zoeller 150 Series Brochure |
INSTRUCTIONS |
Zoeller 150 Series Installation Instructions |
SPECIFICATIONS |
Zoeller 150 Series Specifications Sheet |
REPAIR PARTS |
Zoeller 150 Repair Parts List |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*