Zoeller 32344-0001, Pivot Series, Duplex Control Panel, 115/200/230 Volts, 1 Phase, 20-30 Amps, Indoor/Outdoor NEMA 4X Enclosure

FEATURES

Zoeller Pivot Duplex Control Panel

This single phase control panel is used on a duplex pump application where automatic electrical cycling of the pump is desired for added protection in residential or commercial applications. With one pump operating to handle normal flow, a second pump begins in the event the water level continues to rise. The built in alarm system, a standard feature, can be connected to sound when the second pump becomes operational.  All electrical systems must be installed by a qualified electrician and according to the National Electrical Code.

This control panel can be used with Zoeller pumps:

     I189       I295       I405

Features

• NEMA 12" x 10" x 6" with lockable
• For outdoor or indoor use
• Red alarm beacon with 360-degree visibility
• Audible alarm buzzer rated 95 db at 2ft (0.6 m)
• SILENCE/RESET/TEST toggle switch with weatherproof rubber boot
• HAND/OFF/AUTO control are included for each pump
• Auxiliary output dry contacts (NO-COM-NC) terminals, Form C, 5A resistive load
• Pump Run dry contact, (NO-COM)
• Control circuit powered by 120VAC, 60 Hz
• Alarm circuit can be powered by separate power feed, if needed
• Alarm and control circuits individually fused, 3A, fast-acting, 120VAC
• Circuit breaker protection
• Max alarm and control circuit power consumption: Duplex models 40W
• Max standby power consumption: 5W
• Terminals for 120VAC control power, 120VAC alarm power, up to 4 float switches (duplex), pump input power
• 4 enclosure mounting brackets are included
• All components are serviceable
• All wires and terminal locations thoroughly labeled for easy identification
• cCSAus certified to standard UL508
• FCC Class-B certification to ISED Canada ICES-003, Issue 6
• 5 year limited warranty

Note:  Image is illustrative and may not reflect details of actual product.