Zoeller 4405-0024, Model WD4405, Waste-Mate 400 Series, Sewage Pump with Variable Level Float Switch, 3 HP, 230 Volts, 1 Phase, 4" Flanged Discharge, 361 GPM Max, 38 ft Max Head, 20 ft Cord, Automatic, Double Seal

FEATURES

Zoeller 400 Series Sewage & Dewatering Pump

This "Waste-Mate" double seal pump is designed for high capacity water removal, parking lots, low-flood areas, and water transfer. 

• Cast iron casting
• Stainless steel motor shaft
• Oil filled, hermetically sealed, automatic reset thermal overload protected (1 Ph only) motor
• Upper and lower ball bearing running in bath of oil
• Protects motor from seal leaks, improves seal lubrication and helps eliminate seal and bearing damage from dry runs
• Mechanical shaft seal - carbon and ceramic rotary face seal, with stainless steel wetted parts
• Stainless steel screws, bolts, washers and lifting bracket
• Neoprene square ring & gasket
• Maximum temperature: 130°F
• 4" horizontal flanged discharge, standard ANSI flange
• Passes 3" spherical solids
• Corrosion-resistant, powder-coated epoxy finish
• For unusual conditions, a reserve safety factor is engineered into the design of every Zoeller pump
• Picture represents series and may not be exact

​Applications

• Retrofit on existing sewage installations
• New installations

Notes:

The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles.