Zoeller 75-0001, Model M75, Aqua-Mate Builder Series, Dewatering/Sump Pump, 1/2 HP, 115 Volts, 1 Phase, 5.6 Amps, 1-1/2" NPT Discharge, 50 GPM Max, 25 ft Max Head, 10 ft Cord, Automatic
Call Toll Free: 800-429-0800
FEATURES
Zoeller M75 Builders Series Dewatering/Sump Pump
This submersible pump is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. The pump includes a cast iron motor housing with a corrosion-resistant, baked-on enamel finish and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features
- Corrosion-resistant, powder coated epoxy paint
- Oil-filled, hermetically-sealed motor with automatic reset thermal overload protection
- Rugged cast iron motor housing
- Efficient heat sink for heat dissipation
- Carbon and ceramic rotary seal
- Reliable integrated vertical float switch
- Watertight, NBR rubber seal between motor and cover
- Stainless steel screws and hardware
- On point: 8-1/3"
- Off point: 2-1/2"
- Passes 3/8" spherical solids
- Includes plastic carrying handle
- Fits 12" diameter pits
- 100% factory tested after assembly
- 1 year warranty
- For unusual conditions, a reserve safety factor is engineered into the design of the pump
Note: Image is illustrative and may not reflect details of actual product.
Welcome back to Inspector Pumphead Recommends! In this feature, I will be recommending a specific pump model and highlighting the features, specifications, and benefits of this pump. It could be a new product, a best seller, a seasonally appropriate pump or one that is strongly recommended by the application engineers.
Let's dive in!
Zoeller 75-0001
Zoeller 75 Aqua-Mate "Builder Series"
Today I am highlighting the Zoeller 75 Aqua-Mate "Builder Series" sump pump. The Zoeller 75, is a submersible sump pump, designed to handle groundwater or effluent water in residential or light commercial application settings.
The Zoeller 75 can handle groundwater or effluent water with up to ⅜” spherical solids and is completely submersible in waters up to 104°F. This pump can fit into 12" diameter pits and comes with a 1-year warranty.
Construction
The Zoeller 75 features a variable composite construction, with the motor housing being made of cast iron, while the volute, base, and non-clog vortex impeller are made of engineered plastic. The motor housing also includes a powder coated epoxy paint for corrosion resistance and heat dissipation. The motor is oil filled and features a auto reset thermal overload for added protection.
The shaft is SUS420J2 stainless steel, the rotary mechanical seals are carbon/ceramic and the gasket is watertight NBR rubber.
A reliable integrated float switch is built into the pump for easy automatic operation. The on point is 8 -⅓" while the off point is 2-½". The model listed below includes a UL listed power cord with 3-prong plug and a plastic carry handle.
All in all, this is a solid sump pump for your groundwater or effluent transportation needs.
Specs
| Model | Discharge | HP | Voltage | Phase | GPM | Max. Head | Cord | Mode |
| 75-0001 | 1.5" NPT | 1/2 | 115 | 1 | 50 | 25' | 10' | Auto |
Curve 
Dimensions 
| LITERATURE |
| Zoeller 75 Brochure |
| Zoeller 75 Installation Instructions |
| Zoeller 75 Technical Data Sheet |
| Zoeller 75 Specifications Sheet |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*
