Zoeller 841-0019, Model JX841, X840 Series, Explosion Proof High Flow Single Directional Grinder Pump, 2 HP, 200-208 Volts, 3 Phase, 1-1/4" NPT Vertical Discharge, 59 GPM Max, 125 ft Max Head, 20 ft Cord, Manual
SKU #: 841-0019
Brand: Zoeller
Available For Order! ((Usually Ships 3-5 Days))This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller JX841 Explosion Proof Single Directional Grinder Pump
"The Shark" series of submersible grinder pumps is designed for use in residential or commercial wastewater applications in Class I, Division 1, Groups C and D environments. Each pump is FM/CSA approved and features innovative motor and electrical enclosures that are designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosure become ignited, the enclosure is engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions.
WARNING: Not for use in acidic, methanol, or ethyl acetate atmospheres
Features
- cFMus and CSA rated Class I, Division 1, Group C & D
- Cast iron construction
- Corrosion-resistant, powder coated epoxy finish
- Stainless steel cutter, plate and shaft
- Stainless steel screws, bolts and lifting bail
- 3450 RPM motor with thermal sensor protection
- Oil-filled, hermetically sealed motor with Class F insulation
- Hardened stainless steel cutter and disc Rockwell C55-60
- Reversible cutter action
- Non-clogging bronze vortex impeller
- Upper and lower ball bearing construction
- Dual mechanical seals with leak detection
- Carbon/ceramic tandem seals
- Legs provide for free standing installation
- 20 ft UL listed SOOW power cord- 20 ft sensor cord
- Threaded conduit connection on pump cap to provide protection to power cord and sensor wires
- This model is also available with 35 and 50 ft cord lengths
- Thermal sensors and moisture probes require circuit in control panel to function reversible feature
Brand | Zoeller |
Mfg. Number | 841-0019 |
Series | X840 |
Model | JX841 |
Product Type | Explosion proof high flow single directional grinder pump |
Application | Residential/Commercial wastewater |
Operation | Manual |
Horsepower | 2 HP |
Voltage | 200 Volts |
Phase | 3 |
Frequency | 60 Hz |
Speed | 3450 RPM |
Pump Casing | Cast iron |
Maximum Flow | 62 GPM |
Maximum Total Head | 124 ft |
Discharge Connection | 1-1/4" NPT vertical |
Maximum Current | 12.3 Amps |
Impeller Design | Non-clogging, vortex |
Power Cord Length | 20 ft |
Impeller Material | Bronze |
Maximum Temperature (Continuos) | 104°F |
Motor Insulation | Class F |
Overload Protection | Control panel required |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*