Blog

Zoeller's Aquanot 508 battery backup sump pump system provides extra protection when a primary AC pump shuts down due to a power outage or another electrical problem. An automatic, 10 amp, UL recognized charger/controller with battery burnout and overcharge protection maximizes battery life and provides over 7 hours of continuous pumping. All necessary pipes, valves, and fittings are included to transform your existing system into a complete AC/DC sump pump system. The alarm, light indicator, and warning system ensure peace of mind for the homeowner. Pump 12 V, highly-efficient, non-corrosive pump construction. Supplied with 6' (1.8 m) leads. NOT a Bilge pump. Designed, Engineered, and Assembled by Zoeller® as a sump pump Integrated check valve Legs allow free-standing installation Quick disconnect discharge Aluminum seal pocket and cooling plate Hand built and 100% tested in USA Efficient design means more water pumped during emergencies 3-year warranty (Primary sump pump not included with Model 508) Control Box Includes battery burn-out and overcharge protection. The self-contained, 10 amp battery recharger system is a solid-state, automatic controller with alarms, light indicators, and warning systems. LCD Screen Always displays battery voltage along with other helpful information about the system. LED Light Indicators AC Power - blinks red when power is out Charged - green indicates battery is fully charged Charging - yellow indicates power is going to battery Low Battery - red light blinks when below 10.8 volts and rapidly blinks when below 8.4 volts High Water - yellow light will blink when the float is activated, and becomes solid after 3 seconds Alarm Off - yellow light indicates the buzzer is currently silenced Alarms High Water Reverse Polarity Low Battery Buttons Scroll - display information on the system such as DC pump cycles and power outages Alarm Reset - press to reset alarms. Press and hold for three seconds for 24-hour buzzer silence Auxiliary Alarm Contact A set of dry contacts allows system to connect to home security alarm, auto dialers, etc. Receive alarms through Z Control Cloud! Switch Reliable, low voltage vertical float switch Battery Case The included battery case will accommodate maximum battery dimensions of 13" L x 7-1/2" W x 9-1/2" H (33 cm L x 19 cm W x 24 cm H) and fits all group size 27, 29, and 31 batteries. Made from non-corrodible polyethylene. To use multiple batteries, order extra battery case with hook-up wire (P/N 007861). Battery not included. Fittings An integrated DC pump discharge check valve, additional AC pump check valve, tee, and adapter are included. Technology This charger uses the latest switch mode technology available. This allows for an extremely efficient charger in a compact design. It satisfies the rigid California Battery Council standards. Charger is also cURus approved. ZOELLER AQUANOT 508 BATTERY BACKUP SUMP PUMP SYSTEM Model Comparison Chart Model Discharge (NPT) Voltage Frequency Rating GPM Max. Head 508-0005 1-1/2" 12 60 Hz 39 22' PERFORMANCE CURVES COMPONENTS EXPLODED VIEW TDH FLOW PER MINUTE TROUBLESHOOTING BROCHURE Zoeller Aquanot 508 Brochure INSTALLATION MANUAL Zoeller Aquanot Active 508 Installation Manual Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Zoeller's Aquanot 508 battery backup sump pump system, designed and tested for reliability, works alongside submersible or pedestal pumps to provide up to 5.5 hours of continuous high performance pumping when the primary pump power is interrupted. The Active controller includes protection, an automatic charging system, low battery indicator, and alarm. This system also includes a redundant high water switch and self-testing technology. The Active 508 is a premium Internet-connected system that can also notify your mobile device. Self-testing and smart diagnostics Emergency boost mode Early warning diagnostics Z Control® Enabled notification and remote access Z Control® Cloud and App (see links below) 5-year warranty (Primary sump pump not included with Model Active 508) AUXILIARY ALARM CONTACT: A set of dry contacts allows system to connect to home security alarm, auto dialers, etc. BATTERY CASE: The included battery case will accommodate maximum battery dimensions of 13" L x 7-1/2" W x 9-1/2" H (33 cm L x 19 cm W x 24 cm H) and fits all group size 27, 29, and 31 batteries. Made from non-corrodible polyethylene. To use multiple batteries, order extra battery case with hook-up wire (P/N 007861). Battery not included. FITTINGS: An integrated DC pump discharge check valve, additional AC pump check valve, tee, and adapter are included. TECHNOLOGY: This charger uses the latest switch mode technology available. This allows for an extremely efficient charger in a compact design. It satisfies the rigid California Battery Council standards. Charger is also cURus approved. ZOELLER AQUANOT ACTIVE 508 BATTERY BACKUP SUMP PUMP SYSTEM Model Comparison Chart Model Discharge (NPT) Power Cord Voltage GPM Max. Head 508-0008 1-1/4" & 1-1/2" 8' 12 39 22' PERFORMANCE CURVES DIAGRAM LED INDICATORS TDH FLOW PER MINUTE TROUBLESHOOTING BROCHURE Zoeller Aquanot Active 508 Brochure INSTALLATION INSTRUCTIONS Zoeller Aquanot Active 508 Installation Instructions CONTROL GATEWAY INSTRUCTIONS Zoeller Aquanot Active 508 Control Gateway Instructions TECHNICAL DATA Zoeller Aquanot Active 508 Technical Data APP INSTRUCTIONS Zoeller Aquanot Active 508 App Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Zoeller's scale removal system comes preassembled and removes line build-up in tankless water heating units. An internal, reusable filter sock captures debris removed from the pipe system. A durable, air-filled 1/6 HP submersible pump and 3/4” stainless steel braided flush lines ensure quality and reliability for years of trouble-free performance. Recommended by professionals job after job, this system is an ideal and economical tool for plumbing contractors who install and service tankless water heating systems. Features Preassembled - includes hoses, tank, pump, and fittings Internal reusable filter sock captures debris Meets flushing requirements for tankless water heating systems Specifications: Pump - 1/6 HP, 3.0 FLA, 345 watts, 115V, air-filled (no oil), quiet running submersible pump Tank & Lid - 5 gallon (23 L) polyethylene tank with stainless steel hardware 3/4" stainless steel braided flush lines Stainless steel handles Corrosion resistant components Recirculation rate: 3 gallons per minute (13.6 LPM) 100% factory assembled Patent pending ZOELLER SCALE REMOVAL SYSTEM Model Comparison Chart Model Connection Size (NPT) HP Voltage Phase GPM Amps 109-0005 3/4" 1/6 115 1 3 3 DIAGRAM PARTS BREAKDOWN BROCHURE Zoeller Scale Removal System Brochure INSTRUCTIONS Zoeller Scale Removal System Instructions SPECIFICATIONS Zoeller Scale Removal System Specifications Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Zoeller model 519 condensate pump is thermally-protected with four inlet options and can handle condensate up to 140 °F. This fully automatic, easily installed, condensate pump removes condensation from air conditioning equipment, condensing furnaces, dehumidifiers, ice makers, water coolers, and refrigeration systems.  Features Handles condensate up to 140°F (60°C) 20 ft (6.1 m) TDH Wall mounts Four inlet options 3/8” Discharge Stainless steel shaft Built-in safety switch and check valve 6 ft power cord with ground Thermally protected ZOELLER MODEL 519 CONDENSATE PUMP Model Comparison Chart Model Discharge Power Cord Voltage GPH Max. Head 519-0005 3/8" 6' 115 110 20' PERFORMANCE CURVE DIAGRAM TDH FLOW PER HOUR SPECIFICATIONS BROCHURE Zoeller Model 519 Condensate Pump Brochure DATA SHEET Zoeller Model 519 Condensate Pump Data Sheet Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Zoeller's oil guard systems are engineered to recognize the difference between water and oil, these systems help protect the environment and equipment from the dispersion of oils and/or hydrocarbons by only pumping water. They are perfect for elevator sumps, transformer vaults, or other applications where there is a need to remove water containing oil. Independently verified by OnSpeX, division of CSA, the Oil Guard includes one of four pump models, Oil Smart Pump Switch and alarm. Multiple features and options are available including NEMA-4X alarm panel enclosure, audible and light alarms, and dry contacts. Turn this product into a connected device using the Z Control Cloud. Monitor dry contacts to receive email, text, and push notifications. Systems Operation of the Zoeller Oil Guard® System has been independently verified by OnSpeX, div. of CSA, when installed in accordance with our instructions Choose from four model pumps. Includes pump, Oil Smart® switch, and alarm (optional control panel) Oil Smart® Switch and Alarm Panel features NEMA-4X alarm panel enclosure Audible light alarms and dry contacts Preset ‘on’ and ‘off’ points differentiates between oil and water and alerts maintenance personnel of high-water or oil-detected conditions 20' (6 m) piggyback electrical supply cord 20 amp internal relay Alarm test and silence switches 304 stainless steel probes UL508 approved switch Alarm panel cCSAus listed Pump features Durable, cast iron construction Powder coated epoxy finish All stainless steel fittings Simplex Panel features Oil Smart® Liquid alarm switch Oil Smart® pump switch NEMA 4X watertight enclosure with lockable latch 30.0 amp motor start relay Pump HOA switch Top-mounted, red alarm beacon light 81-84 decibel rated alarm horn Horn silence and alarm test switches Alarm automatically resets Dry auxiliary alarm contacts Separate circuit protection for alarm Circuit breaker protection Receive alarms through Z Control® Cloud! See FM3010. Duplex Panel features Oil Smart® liquid alarm switch Oil Smart® pump switch Oil Smart® high water alarm switch for high demand, two-pump operation NEMA 4X watertight enclosure with lockable latch Two 30.0 amp motor start relays Pump HOA switch Top-mounted, red alarm beacon light 81-84 decibel rated alarm horn Horn silence and alarm test switches Alarm automatically resets Dry auxiliary alarm contacts Separate circuit protection for alarm ZOELLER OIL GUARD SYSTEMS Model Comparison Chart Model Discharge (NPT) HP Voltage Phase GPM Max. Head 940-0005 1-1/2" 3/10 115 1 43 19' 940-0006 1-1/2" 4/10 115 1 69 38' 940-0012 1-1/2" 4/10 115 1 69 38' 940-0013 1-1/2" 1/2 115 1 77 44' 940-0007 1-1/2" 1/2 115 1 77 44' 940-0008 1-1/2" 1/2 115 1 100 56' 940-0014 1-1/2" 1/2 115 1 100 56' PERFORMANCE CURVES DIMENSIONS TDH FLOW PER MINUTE WIRING DIAGRAM COMPONENTS BROCHURE Zoeller Oil Guard Systems Brochure INSTALLATION MANUAL Zoeller Oil Guard Systems Installation Manual SPECIFICATIONS Zoeller Oil Guard Systems Specifications TECHNICAL DATA Zoeller Oil Guard Systems Technical Data SWITCH SPECIFICATIONS Zoeller Oil Guard Systems Switch Specifications Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Zoeller's Qwik Jon Ultima series of toilet grinder pumps are designed to handle a toilet, sink, tub, and/or shower, even when gravity drains are not an option. With multiple model configurations, this system provides the flexibility to install a bathroom almost anywhere. This compact system is preassembled for easy installation and low cost. With no need to destroy or elevate the floor, the grinder tank can be installed free-standing or behind the wall. This series is designed with convenient auxiliary inlets to accommodate a toilet, lavatory, bathtub, and/or shower in a basement, cottage, tool shed, holiday home, etc. A powerful 1/2 HP motor delivers almost twice the shut-off head of the leading competitor. By utilizing grinder technology instead of a macerator, this system is engineered to never need cleaning and to remain maintenance-free for the life of the system. A “never dull” cutter assembly of hardened steel provides over 70,000 cuts per minute. Contains 1/2 HP (0.7 kW) mini grinder pump - not a macerator Preassembled pump and tank for easy installation Model 202 includes a comfort-height, ADA-compliant, Zoeller rear-discharge toilet with elongated bowl, or you can use Model 203 (60 Hz only) Ultima with a variety of rear outlet toilet styles Can be installed either free-standing or behind a wall with the 2" MPT or 1-1/2" internal slip side inlets No need to destroy concrete floors No need to elevate floor Designed for a full or a half bathroom, this system can accommodate a toilet, lavatory, bathtub, and/or shower. Perfect for basements, cabins, workshops, garages, additions, pool houses, etc. Reduces construction costs 1” discharge (can be reduced to 3/4” to replace existing systems) Pumps any direction Patent Nos. 7,203,976; 2,512,023; 9,352,327; 8,562,287 1.6 GPF (6.1 LPF) Hardware to mount toilet to floor sold by others Qwik Jon Ultima features Non-corrosive, engineered thermoplastic, mini grinder pump Premium grinder blade: Investment-cast 440 stainless steel cutter plate is engineered to handle cloth, latex, and other hard to grind materials. Tri-Slice® Cutter Technology - three independent cutting channels provide over 250,000 cuter per minute. Pump 100% factory tested after assembly Automatic reset thermal overload protected Hardened stainless steel cutter and disc Carbon/ceramic mechanical shaft seal Upper and lower ball bearing running in a bath of oil All stainless steel hardware ABS tank with 2” MPT of 1-1/2” slip side inlets Preassembled with preset piggyback vertical float switch Two models available, complete with toilet (model 202) or tank only adaptable to standard rear outlet toilets (model 203) This system includes Model 202: tank, mini grinder pump, and a comfort height, ADA-compliant toilet with elongated bowl Model 203: tank and mini-grinder pump (standard rear outlet toilet with a discharge height of 4" (10 cm) from floor to centerline must be purchased separately) Mini-grinder pump features Automatic level control switch Thermal overload protected motor Stainless steel screws, bolts, and handle Non-clogging vortex impeller UL listed, 3-wire, neoprene 9' (3 m) cord, and plug Maximum temperature: 130 °F (54 °C) Tank features Durable ABS tank with white finish Light-weight Built-in check valve Items included Comfort-height, ADA-compliant toilet with elongated bowl (model 202 only) Tank, lid, and gasket 1/2 HP mini grinder pump Back-flow device (check local codes) 1” discharge and 1-1/2” vent Extension kit (model 203) Hardware pack Installation instructions Model 202 shipping weight: 121 lbs (55 kg) Model 203 shipping weight: 37 lbs (17 kg) Items needed by the installer Supply fittings and waste pipe Toilet (model 203 only) Toilet seat Electrical source with ground fault interrupter (GFCI) protected receptacle Water supply Tools ZOELLER QWIK JON ULTIMA TOILET GRINDER PUMPS Model Comparison Chart Model Discharge HP Voltage RPM GPM Max. Head 202-1000 1" 1/2 115 3450 45 30' 203-0005 1" 1/2 115 3450 45 30' 203-1007 1" 1/2 115 3450 45 30' PERFORMANCE CURVES DIMENSIONS TDH FLOW PER MINUTE TROUBLESHOOTING SPECIFICATIONS BROCHURE Zoeller Qwik Jon Ultima Toilet Grinder Pumps Brochure INSTRUCTIONS Zoeller Qwik Jon Ultima Toilet Grinder Pumps Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Zoeller Qwik Jon Ultima 204 Lavatory & Shower Unit is part of an economical sewage system designed for freestanding or built in installation. It is perfect for basements, cabins, workshops, garages, additions, pool houses, etc. NOTE: This unit is not intended to be used with a toilet system. For the toilet system compatible unit, refer to the Zoeller 203-0005.   Includes Tank, lid, and gasket 1/2 HP mini-grinder pump Back-flow device (check local codes) 1" discharge and 1-1/2" vent Hardware pack Installation instructions Features Includes Non-clogging vortex Dual cutting action provides over 70,000 cuts per minute Preassembled pump and tank for easy installation No need to destroy concrete floors No need to elevate floor Designed to accommodate a lavatory, bathtub, and/or shower Perfect for basements, cabins, workshops, garages, additions, pool houses, etc. Reduces construction costs 1" discharge (can be reduced to ¾” to replace existing systems) Pumps any direction Can be installed freestanding or behind a wall with the 2” MPT or 1 1/2” internal slip side inlets Note: These pumps are not designed for use in any other application. Pump Features Automatic level control switch Thermal overload protected motor Stainless steel screws, bolts and handle Non-clogging vortex impeller UL listed 3-wire neoprene 9 ft. (3m) cord and plug Maximum temperature 130°F (54°C), 7.0 FLA Tank Features Durable ABS tank with white finish Lightweight Built in check valve ZOELLER QWIK JON ULTIMA 204 Model Comparison Chart Model Discharge HP Voltage RPM GPM Max. Head 204-1000 1" 1/2 115 3450 45 30' PERFORMANCE CURVES DIMENSIONS TDH FLOW PER MINUTE TROUBLESHOOTING REPAIR PARTS BROCHURE Zoeller Qwik Jon Ultima 204 Brochure INSTRUCTIONS Zoeller Qwik Jon Ultima 204 Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Zoeller's series of drain pumps with special options removes water from areas where gravity flow is unavailable. Applications include laundry tray pump, wet bar sink, lavatory, air conditioning condensate, or dehumidifier water removal. These drain pumps can also be used in conjunction with dishwashers and garbage disposal applications. This series does not have inlet filters or screens to clean. Drain Pump Series Includes: Automatic pumps with tank cord seals and all hardware for easy assembly Polypropylene basin and lid Internal discharge pipe to lid Check valve (model 105: 30-0181, Model 135: 30-0102) Pump Features 105-0010 (Model 53) 2" inlet Passes laundry lint Automatic, float operated mechanical switch 1550 RPM 9' (2.7 m), UL listed, 3-wire cord and plug Stainless steel screws, guard, handle and switch arm Passes 1/2" (50 mm) spherical solids 1-1/2" NPT discharge Non-clogging vortex impeller Glass-filled polypropylene base with built-in strainer Temperature rated: 130 °F (54 °C) UL listed pump Shipping weight: 30 lbs (13.6 Kg) 135-0005 (Model 152) High head Passes laundry lint Durable, cast iron construction Corrosion-resistant, powder coated epoxy finish Stainless steel lifting handle Assembled with stainless steel bolts Non-clogging engineered thermoplastic vortex impeller design Passes 3/4" (19 mm) spherical solids Temperature rated: 130 °F (54 °C) Motor: 3450 RPM, oil-filled, hermetically-sealed, automatic reset thermal overload protected Carbon/ceramic seals Upper sleeve bearing and lower ball bearing running in bath of oil 4/10 HP 15' (5 m), UL listed power cord with molded, 3-wire plug and wired-in, vertical float switch 1-1/2" NPT discharge cCSAus certified pump Shipping weight: 48 lbs (21.8 Kg) Basin Polyethylene construction Corrosion-resistant High capacity Gasketed, polyethylene lid 2" NPT vent 1-1/2" NPT discharge 2" NPT inlet - no screen Threaded connections for easy installation Height: 15-1/2" (39.4 cm) Width: 15-3/4" (40 cm) Weight: 5 lbs (2.3 Kg) Gas-tight cover Temperature rated: 130 °F (54 °C) Fits under single or double laundry tray sinks Check Valve (30-0181) 'Full Flow' design 1-1/2" or 1-1/4" slip x slip union PVC constructions Check Valve (30-0102) 'Full Flow' design 1-1/2" solvent weld PVC construction ZOELLER DRAIN PUMPS WITH SPECIAL OPTIONS Model Comparison Chart Model Discharge (NPT) HP Voltage Phase GPM Max. Head 105-0010 1-1/2" 1/3 115 1 43 19.25' 135-0005 1-1/2" 4/10 115 1 69 38' PERFORMANCE CURVES DIMENSIONS TDH FLOW PER MINUTE SERVICE CHECKLIST INSTALLATION TIPS BROCHURE Zoeller Drain Pumps with Special Options Brochure INSTRUCTIONS Zoeller Drain Pumps with Special Options Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Zoeller's drain pump series removes water from areas where gravity flow is not available such as laundry trays, wet bar sinks, lavatories, air conditioning condensate, and dehumidifiers. This series can also be used in conjunction with dishwashers and garbage disposal. No inlet filters or screens to clean Optional top or side inlet Can be installed with internal trap Automatic pumps with tank cord seals All hardware for easy assembly Polypropylene basin and lid Internal discharge pipe to lid (trap supplied by others) Check valve (30-0181, not included with model 104) Contact factory for additional inlet option or high head applications Easy installation, no need to dig a sump 132 comes preassembled Pump features Models 53, 55, 57, 59, 98 Passes laundry lint Automatic, float-operated mechanical switch 9' (3 m), UL listed, 3-wire cord and plug (15' [5 m] cord standard on model 98) Stainless steel screws, guard, handle and switch arm Passes 1/2” (12.7 mm) spherical solids 1-1/2” NPT discharge 1550 RPM on 50 series 1725 RPM on model 98 Non-clogging vortex impeller Glass-filled, polypropylene base with built-in strainer Model 59 - all bronze construction Models 57 and 98 - all cast iron construction Temperature rated 130 °F (55 °C) UL and cCSAus listed pump Model 72 Passes laundry lint 9' (3 m), UL-listed, 3-wire cord and plug Stainless steel screws, switch arm and lower motor housing Oil-free Passes 3/8” (9.5 mm) spherical solids 1-1/2” NPT discharge 3400 RPM Non-clogging vortex impeller Temperature rated 110 °F (43 °C) cCSAus listed pump Basin Polypropylene construction Corrosion-resistant High capacity Gasket-sealed polypropylene lid 2” NPT vent 1-1/2” NPT discharge 1-1/2” compression slip fit for top and side intake. Note: 132 comes preassembled, for side inlet only Threaded connections for easy installation May be installed with internal trap for space savings Gas-tight cover Temperature rated 130 °F (55 °C) Fits under most sinks Basin passes 10’ (3 m) stack test – Models 104 and 132 will not pass 10’ (3 m) stack test Check valve (excluding model 104) (30-0181) “Full Flow” design 1-1/2” or 1-1/4" slip x slip union PVC construction For additional specifications, see FM0217. ZOELLER DRAIN PUMP SERIES Model Comparison Chart Model Discharge (NPT) HP Voltage Phase GPM Max. Head 104-0005 1-1/2" 0.3 115 1 38 18' 132-0001 1-1/2" 0.3 115 1 38 18' 115-0001 1-1/2" 0.3 115 1 43 19.25' 105-0001 1-1/2" 1/3 115 1 43 19.25' 131-0001 1-1/2" 1/2 115 1 72 23' 110-0001 1-1/2" 0.3 115 1 43 19.25' 120-0001 1-1/2" 0.3 115 1 43 19.25' PERFORMANCE CURVES DIMENSIONS REPLACEMENT PARTS SERVICE CHECKLIST INSTALLATION TIPS BROCHURE Zoeller Drain Pump Series Brochure INSTRUCTIONS Zoeller Drain Pump Series Instructions SPECIFICATIONS Zoeller Drain Pump Series Specifications Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Zoeller crawl space systems are designed specifically with tight or restricted spaces in mind. Indoors or outdoors, these systems eliminate standing water from areas without proper drainage. They also prevent the accumulation of moisture, fungus, and odors commonly found in residential crawl spaces. Perforated basins and solid lids keep large debris from entering the pit, eliminating maintenance. Helps Eliminate: Mold and fungus which cause allergies Moisture damage to wood floors, rugs, metal ducts, insulation Rodents, slugs, insects, pests Insecticide dilution Property inspection problems Odor Structural damage due to freezing water buckling concrete Water pooling in yard, on drive, patio and around house System Includes: Automatic pump 24' (7 m) hose Tank assembly Dimensions and Weight Overall height: 14-7/8" (38 cm) Upper flange width: 15-5/8" (40 cm) Body width: 12-1/4" (31 cm) Model 108: 33 lbs (15 kg) Model 138: 49 lbs (22 kg) ZOELLER CRAWL SPACE SYSTEMS Model Comparison Chart Model Discharge (NPT) HP Voltage Power Cord GPM Max. Head 108-0001 1-1/2" 3/10 115 25' 43 19.25' 108-0009 1-1/2" 1/4 115 20' 32 18' 138-0001 1-1/2" 1/2 115 25' 72 23' PERFORMANCE CURVES TDH/CAPACITY PER MINUTE REPLACEMENT PARTS TROUBLESHOOTING INSTALLATION TIPS BROCHURE Zoeller Crawl Space Systems Brochure INSTRUCTIONS Zoeller Crawl Space Systems Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Zoeller 912 series of simplex sewage systems is job-ready and provide for quick and easy installation, saving labor and reducing installation errors. No assembly required. Just drop it in the hole-and-go! Sewage system packages include a sewage pump and various other accessories to help maintain your system. Simplex (one pump) packages are ideal for domestic or small business systems. Features More choices Easier installation Fast delivery Saved labor Reduced installation errors System includes 2” (50 mm) solids-handling pump 2” PVC discharge pipe, 30” (76 cm) long (24” [61 cm] long on 24” x 24” [61 x 61 cm]) and (36” [91 cm] long on 24” x 36” [61 x 91 cm]) Basins—polyethylene, poly-foam or fiberglass construction with poly or solid steel covers and 4” pipe seal hub, 4” PVC hub (deluxe) or 4” cast iron hub on L.A. Code Systems Check valve options—30-0151, 30-0020, 30-0021, 30-0101, 30-0103 (not included) Systems available with alarms and pre-installed alarm float Premium indoor systems have a split cover for easy pump inspection, torque stops and an anti-flotation device Side discharge systems rated for outdoor burial—solid polyethylene structural foam lid and basin with 2” discharge on side 3/16” (5 mm) vent hole drilled ZOELLER 912 SERIES SIMPLEX SEWAGE SYSTEMS Model Comparison Chart Model Discharge (NPT) Pump Model HP Voltage GPM Max. Head 912-0074 2" BN211 4/10 115 82 19' 912-0073 2" M211 4/10 115 82 19' 912-0029 2" BN264 4/10 115 90 18' 912-0007 2" M264 4/10 115 90 18' 912-0021 2" M264 4/10 115 90 18' 912-0005 2" BN264 4/10 115 90 18' 912-0069 2" M264 4/10 115 90 18' 912-0055 2" BN264 4/10 115 90 18' 912-0010 2" M266 1/2 115 115 20' 912-0083 2" BN264 4/10 115 90 18' 912-0082 2" M264 4/10 115 90 18' 912-0084 2" M266 1/2 115 115 20' 912-0070 2" M266 1/2 115 115 90' 912-0086 2" M264 4/10 115 90 18' 912-0006 2" M264 4/10 115 90 18' 912-0025 2" M266 1/2 115 115 90' 912-0017 2" BN266 1/2 115 115 90' 912-0033 2" BN266 1/2 115 115 90' 912-0056 2" BN266 1/2 115 115 90' 912-0085 2" BN266 1/2 115 115 90' 912-0018 2" BN266 1/2 115 115 90' 912-0063 2" M266 1/2 115 115 90' 912-0061 2" M264 4/10 115 90 18' 912-0087 2" BN264 4/10 115 90 18' 912-0012 2" M266 1/2 115 115 90' 912-0065 2" BN264 4/10 115 90 18' 912-0088 2" M266 1/2 115 115 90' 912-1007 2" M264 4/10 115 90 18' 912-1005 2" BN264 4/10 115 90 18' 912-0091 2" BN264 4/10 115 90 18' 912-0090 2" M264 4/10 115 90 18' 912-1055 2" BN264 4/10 115 90 18' 912-0092 2" M266 1/2 115 115 90' 912-0067 2" BN266 1/2 115 115 90' 912-0016 2" BN264 4/10 115 90 18' 912-0019 2" BN266 1/2 115 115 90' 912-0089 2" BN266 1/2 115 115 90' 912-1017 2" BN266 1/2 115 115 90' 912-0077 2" M264 4/10 115 90 18' 912-0093 2" BN266 1/2 115 115 90' 912-0020 2" BN266 1/2 115 115 90' 912-1010 2" M266 1/2 115 115 90' 912-1056 2" BN266 1/2 115 115 90' 912-1086 2" M264 4/10 115 90 18' 912-1087 2" BN264 4/10 115 90 18' 912-1082 2" M264 4/10 115 90 18' 912-1083 2" BN264 4/10 115 90 18' 912-1088 2" M266 1/2 115 115 90' 912-1089 2" BN266 1/2 115 115 90' 912-1085 2" BN266 1/2 115 115 90' 912-1067 2" BN266 1/2 115 115 90' 912-1084 2" M266 1/2 115 115 90' 912-1091 2" BN264 4/10 115 90 18' 912-1090 2" M264 4/10 115 90 18' 912-0078 2" M264 4/10 115 90 18' 912-0080 2" BN264 4/10 115 90 18' 912-1092 2" M266 1/2 115 115 90' 912-1093 2" BN266 1/2 115 115 90' 912-0081 2" BN266 1/2 115 115 90' 912-0079 2" M266 1/2 115 115 90' 912-1080 2" BN264 4/10 115 90 18' 912-1081 2" BN266 1/2 115 115 90' PERFORMANCE CURVES TDH FLOW PER MINUTE CHECK VALVE OPTIONS BROCHURE Zoeller 912 Series Simplex Sewage Systems Brochure PACKAGE CATALOG Zoeller 912 Series Simplex Sewage Systems Package Catalog Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Zoeller 912 series of preassembled sewage systems is job-ready and provides for quick and easy installation, saving labor and reducing installation errors. No assembly required. Just drop it in the hole-and-go! Systems include (1) 2” (50 mm) solids sewage ejector (1) 24” x 24” (61 x 61 cm) poly-molded basin (1) PSF cover with 2V2D Internal 2” (DN50) PVC discharge pipe Pump Features Cast iron construction (models 264/266) Thermoplastic construction (model 211) Automatic or piggyback configuration available Full 2” (50 mm) spherical solids capacity Thermal overload protection Non-clogging vortex impeller Basin Features 24" (61 cm) depth for easier installation in troublesome areas 41 gallon (155 liter) capacity (exceeds 18 x 30) 25 gallon (95 liter) capacity below 4" inlet Vertical support ribs help eliminate stuck float switches Anti-flotation device (AFD) helps to eliminate basin from "floating” 360° molded handle (acts as secondary AFD) (1) 4" pre-drilled inlet (flex-coupling provided by others) (7) additional flat areas for inlet installation (field-drilled) Molded torque stops for added pump support One-piece molded PSF cover with integrated, molded foam seal Ribbed, reinforced cover to provide additional strength and stability Threaded 2" vent and 2" discharge piping connections Stainless steel cover bolts and hardware High water alarm available on certain packages Stackable for storage/shipping ZOELLER 912 SERIES PREASSEMBLED SEWAGE SYSTEMS Model Comparison Chart Model Discharge (NPT) HP Voltage Pump Model GPM Max. Head 912-0112 2" 4/10 115 M211 82 19' 912-1112 2" 4/10 115 M211 82 19' 912-0113 2" 4/10 115 BN211 82 19' 912-1113 2" 4/10 115 BN211 82 19' 912-0114 2" 4/10 115 M264 90 18' 912-1114 2" 4/10 115 M264 90 18' 912-0115 2" 4/10 115 BN264 90 18' 912-1115 2" 4/10 115 BN264 90 18' 912-0116 2" 1/2 115 M266 115 20' 912-1116 2" 1/2 115 M266 115 20' 912-0117 2" 1/2 115 BN266 115 20' 912-1117 2" 1/2 115 BN266 115 20' PERFORMANCE CURVES DIMENSIONS TDH FLOW PER MINUTE CHECK VALVE OPTIONS BROCHURE Zoeller 912 Series Preassembled Sewage Systems Brochure PACKAGE CATALOG Zoeller 912 Series Preassembled Sewage Systems Package Catalog PACKAGE SPECIFICATIONS Zoeller 912 Series Preassembled Sewage Systems Package Specifications Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.