Blog

If you are planning to buy a grinder pump, you have the best option with Goulds Grinder Pumps and Barnes Grinder Pumps. These pumps will grind your pumping concerns to a halt. Your real concern is probably sewage particles. These particles can be big or small, but they will continue to cause you a headache with overflowing sewage and obstructed flow if they are not ground finely. If you have Barnes and Gould grinder pump such as OGV Grinder Pump, you will sleep peacefully. These pumps use Slicerator™ technology. The application of this pump ensures that sewage particles are ground into a fine slurry. This 2 HP pump is powered enough to head to 126 feet and flows to 58 g.p.m with a discharge of 1.25 inches.

Barnes 110649

This model, known as the OGVH2022L Grinder Pump, can turn sewage particles into a fine slurry. The technology used here is OmniGrind Plus. This two-stage technology is patented. This model will work successfully in commercial and domestic settings and can also be successfully deployed for light industrial use.

The pump damage usually caused by cavitation is virtually eliminated with its design feature of a recessed vortex impeller. The mechanical seal life of this pump is extended significantly with minimal shaft deflection. The impeller made of cast iron is robust enough to resist corrosion. You will have no reason to complain of frequent jams with the application of a slicerator grinder in the pump. There cannot be any wiring mistake because the grinder pump comes with a quick-connect power cord. The basin package is pre-wired and tested from the factory. Depending on your need, this grinder pump is available in several horse powers beginning with 2 HP. On the upper end, you have the 7.5 HP model, and in between, you have two models of 3HP and 5 HP. The double mechanical seal ensures a long life and a clean environment.

Barnes 110651

Barnes 110651 is a Model OGVF2022L grinder high-head pump in the OGV series. The function of this pump is to reduce sewage particles into a liquid slurry. The work of this level of perfection is made possible with the application of the OmniGrind Plus technology, which is a patented two-stage technology. The pump finds its ideal applications in light industries, commercial, and residential settings.

The damage from cavitation is eliminated with the vortex impeller design. The pump is designed with additional features to extend its mechanical seal life. The shaft support design makes this life extension possible with its robust and unique 3-bearing support design that can minimize the shaft deflection.

The impeller of the pump is corrosion-proof because it is made of cast iron. The issues relating to jams are taken care of by the exclusive slicerator grinder. The wiring mistakes often seen are also eliminated as this pump uses a quick-connect power cord. The pump has a pretested and pre-wired basin package available from the factory.

The pump under this model comes in a range of horsepowers from 2 HP to 7.5 HP. The other two models are of 3 and 5 Horse Powers. The pump is designed to work smoothly and efficiently for a long without causing environmental damage due to its double mechanical seal.

Goulds 1GD51G2AA

This Goulds 1GD51G2AA model of submersible grinder pump belongs to the 1GD series. It has a dual seal. This pump is powerful enough to smash commercial and domestic raw sewage solids that may be as big as 3 inches. It is quite useful for applications where gravity doesn’t help the outlet, such as high head sewage applications. It is perfect in its application wherever you may need pressure sewage systems.

The impeller is semi-open and multi-vane made of silicon bronze for strong mechanical seal protection. The grinder cutter mechanism in this pump features an anti-roping design with the tough cutter mounted to the motor shaft to give it force and strength. If the first side wears out, the cutting ring can be reversed. In other words, the excellence of the design and material used in its construction ensures an extended life while minimizing its maintenance. The efficiency of the pump ensures to its maximum with the use of heavy-duty cast iron volute.

Goulds 1GD51G3AA

The Goulds 1GD51G3AA pump model is capable of pulverizing sewage waste solids up to 3 inches. It works perfectly in several settings, including domestic, commercial, and light industrial. It is designed for maximum efficiency with heavy-duty volute type cast iron and dual mechanical seal. The pump is especially useful where the gravity system doesn’t work. It is also the best pump to have for pressure sewage.

Goulds Company

The Goulds Pump Company is the industry leader in fluid solutions. The company is recognized for its innovative water technology.

Barnes Company

Barnes Pumps are known for their quality and durability. Many of this company’s pumps run for nearly three decades before being replaced.

Pumps Products

Pumps Products is the nation’s leading supplier of pumps and parts. We stock all major brands, including Goulds, Zoeller, Liberty, Armstrong, Paco, Bell & Gossett, Berkeley, Grundfos, Taco, and Myers, among many others.