The Sta-Rite ProJet SN series pumps are corrosion and abrasion-resistant and are ideal for wells with pumping levels of 25′ or less. These pumps are ideal for water and sprinkling systems in homes, farms and cottages. Self-priming after the pump housing is initially filled with water.
Features:
-
Quality constructed close-grained cast iron body. Drain port provided for easy winterizing
-
Built-in Jet: High-strength Lexan nozzle and venturi for maximum resistance to corrosion and abrasion. Cleanout plug provided for ease of service
-
Precision-molded, Noryl impeller for perfect balance and ultra-smooth for highest performance and efficiency
-
Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser
-
Mechanical shaft seal is precision lapped and highly polished carbon-ceramic, 416 grade stainless steel construction. Internal design guarantees continuous water lubrication
-
Motor windings are made of superior insulation materials protect against excessive moisture and contaminants, assuring prolonged motor life
-
Rotor is diecast under high pressures for uniform performance and greater efficiency, dynamically balanced
-
Heavy-duty ball bearings are shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation
-
Pump and Motor Shaft: Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment
-
All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components
-
Professional quality pressure switch, allows cut-in adjustments
-
Max. Liquid Temperature: 140°F
-
Max. Inlet Pressure: 50 PSI
-
Average Priming Time (in minutes) at 15 Feet:
SNC = 2.3; SND = 1.7
SNE = 1.3; SNF = 1.1
- Average Priming Time (in minutes) at 25 Feet:
SNC = 6.4; SND = 4.4<
SNE = 4.4; SNF = 2.6
- Steel, 12 gauge base
STA-RITE SN SERIES SHALLOW WELL JET PUMPS |
Model Comparison Chart
Model |
Discharge |
Suction |
HP |
Voltage |
Phase |
Approx. Weight |
Switch Setting |
SNC-5L |
1″ NPT |
1-1/4″ NPT |
1/2 |
115/230 |
1 |
45 lbs. |
30-50 PSI |
SNC-L |
1″ NPT |
1-1/4″ NPT |
1/2 |
115/230 |
1 |
45 lbs. |
30-50 PSI |
SNC-HF25L |
1″ NPT |
1-1/4″ NPT |
1/2 |
115/230 |
1 |
45 lbs. |
20-40 PSI |
SND-L |
1″ NPT |
1-1/4″ NPT |
3/4 |
115/230 |
1 |
47 lbs. |
30-50 PSI |
SNE-L |
1″ NPT |
1-1/4″ NPT |
1 |
115/230 |
1 |
55 lbs. |
30-50 PSI |
SNF-L |
1″ NPT |
1-1/4″ NPT |
1-1/2 |
115/230 |
1 |
60 lbs. |
30-50 PSI |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.