You require a booster pump to increase the pressure of liquid or gaseous fluids. However, the construction details of the booster pump will vary depending on the fluid it works upon. A water booster pump depending upon the specification, will work upon water to increase the rate of flow. If it is a gas booster pump, it will increase the pressure on gas and boost its flow. There is a minor difference between a booster pump and a pressure pump. The difference is in size.
Myers MPB Series
The MPB booster pumps series are high-pressure serviceable booster pumps known for durability. The Myers Booster Pumps have well-designed scientific features to make the pump operate continually without causing any damage to the bearings or other pump hydraulic components, including its mechanical seal. The scientific design of the floating impeller ensures that there are minimum thrust loads.
If you are looking for the most durable booster pump, go for any series of Myers Booster Pumps. This booster pump available at Myers promises the most durable machine available anywhere. If you are looking for a booster pump to operate continually, it will serve your purpose without a breakdown. The thrust loads minimize in it with its SignaSeal impeller design. Despite the continuous operation, no damage results to the pump hydraulic components, including its mechanical seal and motor bearings.
Myers 20MPB100-02
This highly durable booster pump has a cast iron motor adapter and base to resist maximum corrosion. The positive impeller drive is available with its single-piece threaded shaft. While its maximum working pressure is 315 PSI, its maximum inlet pressure is 80 PSI only. The suction lift can go up to a maximum of 15 feet (4.57 m) only. It is recommended that it should not be used for a prolonged duration with liquids above 140° F. It has cast iron discharge and stainless steel shell of 300 series.
This pump is impeccable in the highest quality of performance and efficiency, ultra-smooth in operation, perfect balance, and the most efficient sand handling features. The high performance of this pump comes from its staging system that uses precision-molded acetyl impellers floating independently.
The other high-performance feature in this pump is the polycarbonate diffuser that makes it highly resistant to abrasion and corrosion and capable of the ultimate performance. Several other features adding strength and durability to this pump include stainless steel body and shaft of 300 series, Carbon/ceramic, Buna-N mechanical seal, and Buna-N-O rings.
A rotor of the pump gives the pump a perfect balance as it is die-cast under high pressure. You get dynamic balance, high efficiency, and uniform performance with it. The bearings in it are shielded and permanently lubricated. They have been tested extensively to not only give a quiet and smooth operation but also extended life.
Myers Booster Pumps have several applications, such as reverse osmosis, filtration, car wash. No matter what pressure washing you need. Whether it’s agricultural, commercial, or residential, Myers Booster Pumps are designed to serve you well.
Grundfos MQ Series
The Grundfos MQ Series pumps are self-priming multistage centrifugal pumps. The Grundfos Booster pump is suitable for residential water pressure pumping. The two models available in it are MQ3 – 35 and MQ3 – 45 that require pipe connection NPT1.
Grundfos 96860172
The Grundfos 96860172 is a compact pressure boosting pump that is easy to install. It is a compact flow-based all-in-1 pump. This plug-and-play boosting system is bound to give you peace of mind.
This pump is best suited for rainwater and potable water pumping. You will find its optimal efficacy in domestic water supply applications, whether on farms or gardens, homes, cabins, and cottages. You will discover its smart operation as it begins to work reliably once you install it. It can be installed as easily as a toy.
Here are some of its features to understand why it is smooth, efficient, smart, and easy to handle. It is a complete system with nearly zero or utmost low noise. There are built-in protective functions in it. It is compact and easy to install as it requires no accessories, and its reset is automatic.
Grundfos 96860201
Grundfos 96860201pump shares most of its features with Grundfos 96860172. More precisely, it is to be used in similar settings, that is, domestic water supply applications. This pump comes as an all-in-1 unit. It includes the pump along with motor, pressure and flow sensor, diaphragm tank, and controller and check valve.
This pump has several built-in safety features to ensure a long life of this pump. The safety features provide protection against overload conditions, excessive temperature, and dry running. It is a self-priming pump that does not require priming except at installation.
Myers and Grundfos company overview
Myers company manufactures a wide range of residential plumbing products, including regular pumps and accessories, effluent, sump, sewage, and water well. The company has engineered self-primers, solids handling pumps, grinder pumps, and reciprocating pumps in industrial, commercial, and municipal markets.
Grundfos is the last manufacturer of a wide variety of pumps in the world. The company has a global presence with its base in Denmark. The annual production of the company exceeds 16 million pump units.
Pump Products’ company
Pump Products is the largest national distributor that needs no introduction. The company stocks pump and pump products of all leading manufacturers. They offer the best quality products at the lowest prices.
