Deming 7365EN-335-13-3AN, 3MA Hydraulic, envie3 Series, Submersible Solids Handling Pump, 7.5 HP, 208 Volts, 3 Phase, 1750 RPM, 60 Hz, 21 Full Load Amps, E21 Frame, 3" Horizontal Discharge, Mono Vane 8.07" Impeller, Manual

FEATURES

Deming 7365EN Submersible, Air-Filled Demersible Non Clog, Pump

The Deming Demersible Solids Handling pump is engineered for applications involving sewage, effluent, wastewater processing and solids laden media. The envie³ Solids Handling line utilizes an IE3 rated, premium efficient, air-filled motor with glycol cooling jacket, and is suitable for submerged or dry pit installations. 

Please note that power cord is sold separately. Below are the cord size options to be used with this pump:

• 125496XC (30 ft)
• 125496XF (50 ft)
• 125496XJ (75 ft)
• 125496XL (100 ft)

Moisture and temperature sensor wires are included in power cable.

Features

• Mono vane impeller with pump out vanes on back side 
• 8.07" (205) mm) trim standard impeller*
• Cast iron volute and motor housing
• Lead-free bronze wear ring
• 104°F (40°C) continuous max. liquid temperature
• 66 ft (20m) submergence max. depth
• Overload protection must be included in control panel
• Air-filled IE3 premium efficient motor with glycol cooling jacket
• Suitable for use with VFD
• Class H insulation system
• CSA Certified
• Double mechanical seals
• Permanently grease lubricated bearings
• Stainless steel lifting bail and hardware

*This pump is built with standard impeller size of 8.07". If another trim is needed, please call us.

Applications

• General drainage
• Storm water run-off
• Building service
• Power and utility plants
• Pollution control