Zoeller 12314-0001, Pivot Pro Series, Duplex Control Panel, 115/200/230 Volts, 1 Phase, 0-7 Amps, Indoor/Outdoor NEMA 4X Enclosure

FEATURES

Zoeller Pivot Duplex Control Panel

This single phase control panel is used on a duplex pump application where automatic electrical cycling of the pump is desired for added protection in residential or commercial applications. With one pump operating to handle normal flow, a second pump begins in the event the water level continues to rise. The built in alarm system, a standard feature, can be connected to sound when the second pump becomes operational. All electrical systems must be installed by a qualified electrician and according to the National Electrical Code.

This control panel is built with advanced features such as a user-friendly LCD interface and support for pump sensors and Z Control connectivity. The Z Control allows for remote monitoring/control and alert notifications (Z Control requires Wi-Fi Gateway 90002-0001).

This control panel can be used with Zoeller pumps:            

       E53     E55     E57       E59     E98    

       I137     E137    I139     E139    E140   E145

       N151    E151    E152    E153    I266   E266

       I267     E267    I282     E282    E803   E805

       E807    E818

Features

• NEMA 4X, 14" x 12" x 6" enclosure with lockable latch
• For outdoor or indoor use
• Red alarm beacon with 360-degree visibility
• Audible alarm buzzer rated 95 db at 2ft (0.6 m)
• SILENCE/RESET/TEST toggle switch with weatherproof rubber boot
• HAND/OFF/AUTO control are included for each pump
• RS-485 (12VDC, 2W) powered serial port for optional Z Control Gateway connectivity
• Auxiliary output dry contacts (NO-COM-NC) terminals, Form C, 5A resistive load
• Pump Run dry contact, (NO-COM)
• Control circuit powered by 120VAC, 60 Hz
• Alarm circuit can be powered by separate power feed, if needed
• Alarm and control circuits individually fused, 3A, fast-acting, 120VAC
• Circuit breaker protection
• Max alarm and control circuit power consumption: Duplex models 40W
• Max standby power consumption: 5W
• Terminals for 120VAC control power, 120VAC alarm power, up to 4 float switches (duplex), pump input power (floats are sold separately)
• 4 enclosure mounting brackets are included
• All components are serviceable
• All wires and terminal locations thoroughly labeled for easy identification
• cCSAus certified to standard UL508
• FCC Class-B certification to ISED Canada ICES-003, Issue 6
• 5 year limited warranty