Zoeller 53-0004, Model E53 Mighty-Mate Cast Iron Effluent Pump .3 HP, 230 Volts, 1 Phase, 1-1/2" NPT Discharge, 43 GPM Max, 19.25 ft Max Head, 15 ft Cord, Manual
FEATURES
Zoeller "Mighty Mate" Dewatering and Effluent Pump
This pump is a submersible watertight - dust tight unit equipped with a non-clogging vortex impeller and is designed for use in residential or light commercial dewatering applications, groundwater or effluent transfer. This durable cast iron pump includes a powder coated epoxy finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. Each unit is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features
- Cast iron switch case, motor and pump housing
- Engineered thermoplastic base
- Engineered, glass-filled, plastic impeller with metal insert
- Watertight, neoprene square ring between motor and pump housing
- Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor
- Lower and upper bearings, oil-fed cast iron
- Corrosion-resistant, powder coated epoxy finish
- No sheet metal parts to rust or corrode
- Stainless steel screws, switch arm, guard and handle
- No screens to clog
- Stainless steel guard and handle
- Upper and lower sleeve bearings running in bath of oil
- Entire unit pressure-tested after assembly
- Carbon and ceramic shaft seal
- Passes 1/2” spherical solids
- 1-1/2” NPT discharge
- Maximum temperature for effluent or dewatering: 130 °F
- 3 year warranty
Control Panel Options
Below are the control panels that can be used with this pump:
Note: Image is illustrative and may not reflect details of actual product.
Pump Products is now distributing the Zoeller 50 series "Mighty-Mate" submersible effluent or sump pumps. These pumps are built for a wide variety of residential or light commercial effluent applications and can also be used to transport groundwater and general dewatering applications.
The Zoeller 53 and Zoeller 57 series pumps are cast iron while Zoeller 55, Zoeller 57 and Zoeller 59 series pumps are bronze. Every pump in the Mighty-Mate family is designed for corrosion resistance and can pass ½ “ solids. A non-clog vortex impeller is included in every pump.
All models listed below are single phase; manual and automatic options available.
Zoeller 50 Series Mighty-Mate Effluent Pumps |
Model Comparison Chart
Model | Discharge | HP | Voltage | GPM | Max. Head | Type | Cord | Amps |
53-0002 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Manual | 15' | 9.7 |
53-0001 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 9' | 9.7 |
57-0002 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Manual | 15' | 9.7 |
53-0032 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 9' | 9.7 |
53-0029 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 15' | 9.7 |
53-0016 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 25' | 9.7 |
57-0033 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 9' | 9.7 |
53-0004 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Manual | 15' | 4.8 |
53-0003 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Auto | 9' | 4.8 |
57-0004 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Manual | 15' | 4.8 |
57-0001 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 9' | 9.7 |
57-0003 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Auto | 9' | 4.8 |
57-0045 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Auto | 15' | 4.8 |
55-0002 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Manual | 15' | 9.7 |
59-0002 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Manual | 15' | 9.7 |
59-0001 | 1.5" NPT | 1/3 | 115 | 43 | 19.25' | Auto | 9' | 9.7 |
59-0004 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Manual | 15' | 4.8 |
59-0003 | 1.5" NPT | 1/3 | 230 | 43 | 19.25' | Auto | 9' | 4.8 |
Performance Curve |
Dimensions |
TECHNICAL BROCHURES |
Zoeller 50 Series Brochure |
MANUALS |
N/A |
PARTS LISTS |
Zoeller 53 Series Parts List |
Zoeller 55 Series Parts List |
Zoeller 57 Series Parts List |
Zoeller 59 Series Parts List |
SPECIFICATIONS |
Zoeller 50 Series Specifications Sheet |
IMAGES |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*