The Sta-Rite PL series convertible jet pumps are corrosion resistant pumps built for water systems, sprinkling systems and various applications in homes, farms and cottages. Each pump is made of durable fiberglass reinforced thermoplastic, ensuring years of trouble-free installation.
Features
- Pump rustproof constructed body is Dura-Glas fiberglass reinforced thermoplastic—lightweight, rustproof and exceptionally strong. All components in contact with water are resistant to the corrosive and abrasive forces found in the most aggressive water conditions
- Precision-molded Noryl impeller gives perfect balance and ultra-smoothness for highest performance and efficiency
- Noryl Nozzle
- Noryl Venturi
- Buna-N O-ring
- Stainless steel heat sink provides maximum cooling of the mechanical shaft seal
- Heavy-duty motor has a dustproof canopy which completely encloses electrical components and provides dust, dirt and insect protection. Ventilating air cannot contaminate vital switching components. Permanently lubricated, heavy-duty ball bearings ensure smooth, quiet operation and extended motor life
- Precision Diffuser has a multi-port, reinforced polypropylene with brass wear ring design, primes faster and handles more air
- Shallow well jet is sold separately
- Pressure Switch Pre-Set at 30–50 PSI
- Suction-over-drive suction ports
- Performance-proven, simple, built-in pressure regulator is adjustable for best performance on all deep well installations. Pressure gauge included.
- Easy Serviceability: PL pumps are disassembled by removing the stainless steel clamp. Piping does not have to be disturbed. Seal replacement takes only a few minutes. “Control room” motor design makes all components easily accessible
Please note that if using this pump for NEW INSTALLATIONS, a jet assembly package must be purchased separately (see brochure in Manuals tab for choosing the appropriate jet assembly).
STA-RITE PL SERIES CONVERTIBLE JET PUMPS |
Model Comparison Chart
Model |
Discharge |
Suction |
Drive |
HP |
Voltage |
Phase |
Shut-Off Pressure |
Approx. Weight |
PLC-2L |
1″ NPT |
1-1/4″ NPT |
1″ NPT |
1/2 |
115/230 |
1 |
62-72 PSI |
27 lbs. |
PLD-2L |
1″ NPT |
1-1/4″ NPT |
1″ NPT |
3/4 |
115/230 |
1 |
52-62 PSI |
28 lbs. |
PLE-2L |
1″ NPT |
1-1/4″ NPT |
1″ NPT |
1 |
115/230 |
1 |
52-62 PSI |
30 lbs. |
PLF-2L |
1″ NPT |
1-1/4″ NPT |
1″ NPT |
1-1/2 |
115/230 |
1 |
54-64 PSI |
36 lbs. |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.