Goulds 3SD52F4DA, 3SD Series, Sewage Pump, 1-1/2 HP, 460 Volts, 3 Phase, 5 Amps, 3" Flanged Horizontal Discharge, 322 GPM Max, 38 ft Max Head, 20 ft Cord, Manual
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds 3SD Series Non-Clog Submersible Sewage Pump Dual Seal With Seal Sensor Probe
This pump is designed for sewage, effluent, and wastewater application and is capable of handling sewage containing non-abrasive 2-1/2 inch maximum solids.
Features
-
Cast iron, two vane semi-open, non-clog impeller with pump-out vanes for mechanical seal protection. Balanced for smooth operation. Silicon bronze impeller available as an option.
-
Heavy duty cast iron, volute type casing for maximum efficiency. 3" flange conforms to 125 # ANSI standard. Connects to A10-30 guide rail system.
- Dual Mechanical Seals: Silicon carbide vs. silicon carbide outer seal and ceramic vs. carbon inner seal, stainless steel metal parts, BUNA-N elastomers. Upper and lower shaft seals are positioned independently and are separated by an oil-filled chamber.
-
Seal Sensor Probe located in oil-filled chamber. If pumpage should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires optional Seal Fail Circuit in the control panel.
-
300 series stainless steel keyed design shaft.
-
300 series stainless steel fasteners.
-
Capable of running dry without damage to components.
-
Sewage systems
-
Hospitals
-
Flood and pollution control
-
Trailer courts
-
Dewatering/Effluent
-
Motels
-
Farms
Sump, Effluent and Sewage Pump Repair Parts.pdf
3SD Submersible Sewage Pump Dual Seal with Seal Sensor Probe Brochure.pdf
Wastewater Pumps Dewatering, Effluent and Sewage Installation-Operation Manuals.pdf
3SD Sewage Pump Curve.pdf
3SD Sewage Pump Curves.pdf
Brand | Goulds |
Mfg. Number | 3SD52F4DA |
Series | 3SD |
Product Type | Sewage pump |
Application | Sewage/Dewatering/Effluent |
Operation | Manual |
Horsepower | 1-1/2 HP |
Voltage | 460 Volts |
Phase | 3 |
Frequency | 60 Hz |
Speed | 1750 RPM |
Max. Solid Size | 2-1/2" |
Maximum Capacity | 322 GPM |
Discharge Connection | 3" ANSI flange 4 bolt horizontal |
Impeller Material | Cast Iron |
Seal Type | Dual |
Rotation | Clockwise viewed from motor end |
Maximum Head | 38 ft |
Impeller Diameter | 6.5" |
Max. Temperature | 104°F |
Overload Protection | Control panel required |
Cord Length | 20 ft |
Pump Casing Material | Cast Iron |
Shaft Seal Lower | Silicon Carbon vs. Silicon Carbon |
Shaft Seal Upper | Carbon vs. Ceramic |
Max. Working Pressure | 30 PSI |
The Goulds 3SD and 4SD sewage pumps are high capacity submersible sewage pumps designed specifically to handle commercial and industrial level wastewater applications. All of these pumps have maximum capacities in the three digits and have the construction to handle those numbers. Typical application settings include hospitals, trailer courts, farms and motels. Goulds 3SD and 4SD pumps are often prominently featured in flood and pollution control applications. Both series can also be used for general sewage system, dewatering and effluent applications as well. Pumps in both series include a dual seal (outer: silicon carbide vs. silicon carbide; inner: ceramic vs. carbon) for extra protection and a seal sensor probe that can detect if anything penetrates the seal. That's unlikely because each pump contains a cast iron, two vane, semi-open, nonclog impeller with pump out vanes to ward off any impediments. The rest of the pump is similarly constructed with a rugged cast iron volute and 300 series stainless shaft and fasteners. These pumps are capable of running dry without damage to the components. The main difference between the two series is in the solids handling ability and subsequently, the discharge size. 3SD pumps can pass 2.5" waste solids through the 3" NPT horizontal discharge while 4SD pumps can pass 3" solids through a 4" NPT horizontal discharge. Some 4SD pumps have 7 HP motors as well. All models listed here are manually operated and include a 20 ft. power cord.
Goulds 3SD/4SD Series Sewage Pumps |
Model Comparison Chart
Model | Discharge | HP | Voltage | Phase | GPM | Max. Head |
3SD52F1DA | 3" Fl. H | 1.5 | 230 | 1 | 322 | 38' |
3SD52F1EA | 3" Fl. H | 1.5 | 230 | 1 | 232 | 20' |
3SD52F8EA | 3" Fl. H | 1.5 | 208 | 1 | 232 | 20' |
3SD52F8DA | 3" Fl. H | 1.5 | 208 | 1 | 322 | 38' |
3SD52F4EA | 3" Fl. H | 1.5 | 460 | 3 | 232 | 20' |
3SD52F3DA | 3" Fl. H | 1.5 | 230 | 3 | 322 | 38' |
3SD52F4DA | 3" Fl. H | 1.5 | 460 | 3 | 322 | 38' |
3SD52F3EA | 3" Fl. H | 1.5 | 230 | 3 | 232 | 20' |
3SD52F2EA | 3" Fl. H | 1.5 | 200 | 3 | 232 | 20' |
3SD52F2DA | 3" Fl. H | 1.5 | 200 | 3 | 322 | 38' |
3SD52G3CA | 3" Fl. H | 2 | 230 | 3 | 368 | 45' |
3SD52G4CA | 3" Fl. H | 2 | 460 | 3 | 368 | 45' |
3SD52G2CA | 3" Fl. H | 2 | 200 | 3 | 368 | 45' |
3SD52G1CA | 3" Fl. H | 2 | 230 | 1 | 368 | 45' |
3SD52G8CA | 3" Fl. H | 2 | 208 | 1 | 368 | 45' |
3SD52H4BA | 3" Fl. H | 3 | 460 | 3 | 399 | 54' |
3SD52H3BA | 3" Fl. H | 3 | 230 | 3 | 399 | 54' |
3SD52H2BA | 3" Fl. H | 3 | 200 | 3 | 399 | 54' |
3SD52J3AA | 3" Fl. H | 5 | 230 | 3 | 470 | 65' |
3SD52J4AA | 3" Fl. H | 5 | 460 | 3 | 470 | 65' |
3SD52J2AA | 3" Fl. H | 5 | 200 | 3 | 470 | 65' |
3SD52H1BA | 3" Fl. H | 3 | 230 | 1 | 399 | 54' |
3SD52H8BA | 3" Fl. H | 3 | 208 | 1 | 399 | 54' |
3SD52J1AA | 3" Fl. H | 5 | 230 | 1 | 470 | 65' |
4SD52F1DA | 4" Fl. H | 1.5 | 230 | 1 | 400 | 31' |
4SD52F1EA | 4" Fl. H | 1.5 | 230 | 1 | 345 | 20' |
4SD52F8EA | 4" Fl. H | 1.5 | 208 | 1 | 345 | 20' |
4SD52F8DA | 4" Fl. H | 1.5 | 208 | 1 | 400 | 31' |
4SD52F4EA | 4" Fl. H | 1.5 | 460 | 3 | 345 | 20' |
4SD52F3EA | 4" Fl. H | 1.5 | 230 | 3 | 345 | 20' |
4SD52F4DA | 4" Fl. H | 1.5 | 460 | 3 | 400 | 31' |
4SD52F2EA | 4" Fl. H | 1.5 | 200 | 3 | 345 | 20' |
4SD52F2DA | 4" Fl. H | 1.5 | 200 | 3 | 400 | 31' |
4SD52G4CA | 4" Fl. H | 2 | 460 | 3 | 432 | 37' |
4SD52G3CA | 4" Fl. H | 2 | 230 | 3 | 432 | 37' |
4SD52G2CA | 4" Fl. H | 2 | 200 | 3 | 432 | 37' |
4SD52G1CA | 4" Fl. H | 2 | 230 | 1 | 432 | 37' |
4SD52G8CA | 4" Fl. H | 2 | 208 | 1 | 432 | 37' |
4SD52H4BA | 4" Fl. H | 3 | 460 | 3 | 485 | 46' |
4SD52H3BA | 4" Fl. H | 3 | 230 | 3 | 485 | 46' |
4SD52H2BA | 4" Fl. H | 3 | 200 | 3 | 485 | 46' |
4SD52J3AA | 4" Fl. H | 5 | 230 | 3 | 550 | 51' |
4SD52J4AA | 4" Fl. H | 5 | 460 | 3 | 550 | 51' |
4SD52J2AA | 4" Fl. H | 5 | 200 | 3 | 550 | 51' |
4SD52H1BA | 4" Fl. H | 3 | 230 | 1 | 485 | 46' |
4SD52H8BA | 4" Fl. H | 3 | 208 | 1 | 485 | 46' |
4SD52J1AA | 4" Fl. H | 5 | 230 | 1 | 550 | 51' |
4SD52K4FA | 4" Fl. H | 7.5 | 460 | 3 | 620 | 60' |
4SD52K3FA | 4" Fl. H | 7.5 | 460 | 3 | 620 | 60' |
Performance Curves |
Goulds 3SD
Goulds 4SD
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*