Zoeller 12334-0001, Pivot Pro Series, Duplex Control Panel, 115/200/230 Volts, 1 Phase, 15-20 Amps, Indoor/Outdoor NEMA 4X Enclosure
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Call Toll Free: 800-429-0800
FEATURES
Zoeller Pivot Duplex Control Panel
This single phase control panel is used on a duplex pump application where automatic electrical cycling of the pump is desired for added protection in residential or commercial applications. With one pump operating to handle normal flow, a second pump begins in the event the water level continues to rise. The built in alarm system, a standard feature, can be connected to sound when the second pump becomes operational. All electrical systems must be installed by a qualified electrician and according to the National Electrical Code.
This control panel is built with advanced features such as a user-friendly LCD interface and support for pump sensors and Z Control connectivity. The Z Control allows for remote monitoring/control and alert notifications (Z Control requires Wi-Fi Gateway 90002-0001).
This control panel can be used with Zoeller pumps:
Features
- NEMA 4X, 14" x 12" x 6" enclosure with lockable latch
- For outdoor or indoor use
- Red alarm beacon with 360-degree visibility
- Audible alarm buzzer rated 95 db at 2ft (0.6 m)
- SILENCE/RESET/TEST toggle switch with weatherproof rubber boot
- HAND/OFF/AUTO control are included for each pump
- RS-485 (12VDC, 2W) powered serial port for optional Z Control Gateway connectivity
- Auxiliary output dry contacts (NO-COM-NC) terminals, Form C, 5A resistive load
- Pump Run dry contact, (NO-COM)
- Control circuit powered by 120VAC, 60 Hz
- Alarm circuit can be powered by separate power feed, if needed
- Alarm and control circuits individually fused, 3A, fast-acting, 120VAC
- Circuit breaker protection
- Max alarm and control circuit power consumption: Duplex models 40W
- Max standby power consumption: 5W
- Terminals for 120VAC control power, 120VAC alarm power, up to 4 float switches (duplex), pump input power (floats are sold separately)
- 4 enclosure mounting brackets are included
- All components are serviceable
- All wires and terminal locations thoroughly labeled for easy identification
- cCSAus certified to standard UL508
- FCC Class-B certification to ISED Canada ICES-003, Issue 6
- 5 year limited warranty
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*
