Blog

The Sta-Rite S.T.E.P. Plus D series is a 4" diameter multi-stage submersible effluent pump designed for moving clean and gray water in residential, commercial and agricultural use. Designed for use in aerobic and filtered effluent service applications. Energy efficient and built for superior "draw-down" operation. Features: 1-1/4" fiberglass reinforced thermoplastic discharge Stainless steel intake screen allows for 0.080" solids Superior draw-down capability to 4-1/2" vs. 13-1/2" on a standard NEMA 4" Less energy consumption with 25% reduced amp-draw vs. a standard NEMA 4" Cooler and quieter operation, eliminates expensive flow inducer sleeves Stainless steel and composite construction Proven SignaSeal staging system utilizes a patented ceramic wear surface Exclusive dry-run capability Enclosed and self-lubricated Nylatron shaft-bearing resists wear from abrasives Heavy 7/16" positive drive 300 Series stainless steel hexagonal shaft Precision molded for perfect balance, ultra smooth, for the highest performance and efficiency Motor is dry-wound, double ball bearing, double-seal and thermal overload protected, UL and CSA approved Power cord is 600 Volt "SJOW" jacketed 10 ft leads, 2-wire with ground STA-RITE S.T.E.P. PLUS D SERIES EFFLUENT PUMPS Model Comparison Chart Model Discharge HP Voltage Phase Best Efficiency GPM Max. Load Amps 20DOM05221+1 1-1/4" 1/2 230 1 20 5.3 20DOM05121+1 1-1/4" 1/2 115 1 20 10.6 20DOM05121-01 1-1/4" 1/2 115 1 20 9.5 20DOM05221-01 1-1/4" 1/2 230 1 20 4.6 10DOM05221-01 1-1/4" 1/2 230 1 10 5.5 10DOM05121-01 1-1/4" 1/2 115 1 10 11.0 30DOM05221-01 1-1/4" 1/2 230 1 30 4.6 30DOM05121-01 1-1/4" 1/2 115 1 30 9.5 PUMP PERFORMANCE SETTINGS DIMENSIONAL DATA TROUBLESHOOTING MANUAL Sta-Rite S.T.E.P. Plus D Series Owner's Manual SPECIFICATIONS Sta-Rite S.T.E.P. Plus D Series Specifications Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Goulds LEP07 series submersible Effluent Pumps are lightweight, compact, and portable pumps built for transferring graywater with up to 3/4" spherical solids. The LEP07 series are specifically designed for residential effluent systems, general water transfer applications, dewatering applications, and heavy duty sump applications. The LEP07 series Effluent Pump , provides robust performance that belies its compact size. The frame is corrosion resistant with upper and lower heavy duty ball bearing construction. The motor casing, fasteners, and shaft are all stainless steel (hard coated 400 series stainless steel in the case of the shaft) for corrosion resistance. The permanently lubricated motor is built for an extended service life; included is Class F insulation and built-in thermal overload protection with an automatic reset. The motor is a permanent split-capacitor design type motor. Manual and automatic models are available. Automatic models include options for a built-in float switch or a piggyback float switch (5-15P or 6-15P three prong grounding plug) depending on the model. GOULDS LEP07 Series Submersible Effluent Model Comparison Chart Model Discharge HP Voltage Phase GPM Max. Head Operation Float Cord LEP0712F 1-1/2" NPT 3/4 230 1 52 22' Manual N/A 20' LEP0711F 1-1/2" NPT 3/4 115 1 52 22' Manual N/A 20' LEP0712AF 1-1/2" NPT 3/4 230 1 52 22' Automatic Built-In 20' LEP0712ATF 1-1/2" NPT 3/4 230 1 52 22' Automatic Piggyback 20' LEP0711AF 1-1/2" NPT 3/4 115 1 52 22' Automatic Built-In 20' LEP0711ATF 1-1/2" NPT 3/4 115 1 52 22' Automatic Piggyback 20' PERFORMANCE CURVE COMPONENTS BREAKDOWN TYPICAL INSTALLATIONS DIMENSIONS ENGINEERING DATA BROCHURE Goulds LEP07 Submersible Effluent Pump Brochure INSTALLATION MANUAL Goulds LEP07 Submersible Effluent Pump Installation Manual Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Goulds 2ED series Effluent Pumps can be used in a wide variety of effluent systems, commonly found in farms, trailer courts, motels, schools, hospitals, and various industrial settings. 2ED series can handle spherical solids up to 3/4". One of the main features of the 2ED Series Effluent Pumps is the dual mechanical seal with sensor probe. The lower seal is comprised of silicon carbide vs. silicon carbide faces, while the upper seal is comprised of carbon vs. ceramic faces. Both seals include rugged stainless steel metal parts and are encased in BUNA-N elastomers. The seal sensor probe is located in an oil-filled chamber and can detect if leakage penetrates the lower seal. The sensor will send a signal to a Seal Fail Circuit in the control panel. An o-ring also assures positive sealing against contaminants and oil leakage. The pump body itself is rugged cast iron while the motor shaft is corrosion resistant stainless steel of a threaded design. A locknut guards against component damage on accidental reverse rotation. The fasteners are 300 series stainless steel as well, while the pump has upper and lower heavy duty ball bearings. The motor includes Class F insulation and is fully submerged in high grade turbine oil for lubrication and efficient heat transfer. The pump is rated for continuous use when submerged but can also be run dry without damage to the components. The power cable is severe duty rated, as well as oil and water resistant. Please see the application data below to determine if this wonderful series meets your needs. GOULDS 2ED SERIES EFFLUENT PUMPS Model Comparison Chart Model Discharge HP Voltage Phase GPM Max. Head Cord 2ED52B0FA 2" NPT 1/3 115 1 70 29' 20' 2ED52B0EA 2" NPT 1/3 115 1 70 29' 20' 2ED52B1EA 2" NPT 1/3 230 1 70 29' 20' 2ED52B1FA 2" NPT 1/3 230 1 70 29' 20' 2ED52B8FA 2" NPT 1/3 208 1 70 29' 20' 2ED52B8EA 2" NPT 1/3 208 1 70 29' 20' 2ED51C0DA 2" NPT 1/2 115 1 80 46' 20' 2ED51C0HA 2" NPT 1/2 115 1 60 61' 20' 2ED51C1DA 2" NPT 1/2 230 1 80 46' 20' 2ED51C1HA 2" NPT 1/2 230 1 60 61' 20' 2ED51C8HA 2" NPT 1/2 208 1 60 61' 20' 2ED51C8DA 2" NPT 1/2 208 1 80 46' 20' 2ED51C3DA 2" NPT 1/2 230 3 80 46' 20' 2ED51C4DA 2" NPT 1/2 460 3 80 46' 20' 2ED51C3HA 2" NPT 1/2 230 3 60 61' 20' 2ED51C4HA 2" NPT 1/2 460 3 60 61' 20' 2ED51C2DA 2" NPT 1/2 200 3 80 46' 20' 2ED51C2HA 2" NPT 1/2 200 3 60 61' 20' 2ED51D3CA 2" NPT 3/4 230 3 94 66' 20' 2ED51D1CA 2" NPT 3/4 230 1 94 66' 20' 2ED51D4CA 2" NPT 3/4 460 3 94 66' 20' 2ED51F8GA 2" NPT 1-1/2 208 1 95 128' 20' 2ED51D8CA 2" NPT 3/4 208 1 94 66' 20' 2ED51D2CA 2" NPT 3/4 200 3 94 66' 20' 2ED51E3BA 2" NPT 1 230 3 105 78' 20' 2ED51E1BA 2" NPT 1 230 1 105 78' 20' 2ED51E4BA 2" NPT 1 460 3 105 78' 20' 2ED51E8BA 2" NPT 1 208 1 105 78' 20' 2ED51E2BA 2" NPT 1 200 3 105 78' 20' 2ED51F4AA 2" NPT 1-1/2 460 3 131 89' 20' 2ED51F3GA 2" NPT 1-1/2 230 3 95 128' 20' 2ED51F8AA 2" NPT 1-1/2 208 1 131 89' 20' 2ED51F1GA 2" NPT 1-1/2 230 1 95 128' 20' 2ED51F3AA 2" NPT 1-1/2 230 3 131 89' 20' 2ED51F4GA 2" NPT 1-1/2 460 3 95 128' 20' 2ED51F1AA 2" NPT 1-1/2 230 1 131 89' 20' 2ED51F2AA 2" NPT 1-1/2 200 3 131 89' 20' 2ED51F2GA 2" NPT 1-1/2 200 3 95 128' 20' PERFORMANCE CURVE REPAIR PARTS TYPICAL INSTALLATIONS OPERATION RECOMMENDATION CONSTRUCTION MATERIAL DIMENSIONS NOMENCLATURE GUIDE TECHNICAL BROCHURE Goulds 2ED Submersible Effluent Pump Technical Brochure INSTALLATION MANUAL Goulds 2ED Submersible Effluent Pump Installation Manual REPAIR PARTS Goulds 2ED Submersible Effluent Pump Repair Parts PUMP CURVES Goulds 2ED Submersible Effluent Pump Curves Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Goulds WE Series Model 3885 Submersible Effluent Pumps. PumpProducts.com is one of the leading retailers stocking the Goulds WE Series Model 3885 As a Leading Goulds Pump Dealer, our in stock selection includes over 45 models: Model Numbers: WE0311L, WE0318L, WE0312L, WE0311M, WE0318M, WE0312M, WE0511H, WE0518H, WE0512H, WE0538H, WE0532H, WE0534H, WE0537H, WE0511HH, WE0518HH, WE0512HH, WE0538HH, WE0532HH, WE0534HH, WE0537HH, WE0718H, WE0712H, WE0738H, WE0732H, WE0734H, WE0737H, WE1018H, WE1012H, WE1038H, WE1032H, WE1034H, WE1037H, WE1518H, WE1512H, WE1538H, WE1532H, WE1534H, WE1537H, WE1518HH, WE1512HH, WE1538HH, WE1532HH, WE1534HH, WE1537HH, WE2012H, WE2038H, WE2032H, WE2034H, WE2037H The Goulds WE Series are designed to handle gray water, which is water with spherical solids up to 3/4th inch in size. Effluent Pumps are similar to sump pumps; their main difference is performance, which dictates their application. The WE Series is specifically designed for Homes, Farms, Trailer Courts, Motels, Schools, Hospitals, Industry, and other Effluent Systems. Some of the features and benefits of the WE Series: • Maximum solid size: 3/4” • Maximum Discharge size: 2” NPT • Maximum capacity: 140 Gallons Per Minute (GPM) • Maximum total head: 128 Total Dynamic Head (TDH) As one of the leading Goulds Pump Dealers, we stock most of the pumps from the WE series and are able to provide our customers with the following variety of specifications: • Range from 1/3 HP to 2 HP • Range of 115 -575 volts • Comes in either Class B or Class F insulation • Available in both single and three phase

The PE Series Sewage Pumps Models: PE31M, PE31P1, PE41M, PE41P1, PE42M, PE42P1, PE51M, PE51P1, PE52M, PE52P1 As a Leading Goulds Pump Dealer, our in stock selection includes over 10 models The Goulds PE Series Submersible Effluent Pumps are designed to handle gray water, which is water with spherical solids up to 3/4th inch. Effluent pumps are similar to sump pumps, their main difference is performance, which dictates it application. The PE Series is specifically designed for Mound Systems, Effluent/Dosing Systems, Low Pressure Pipe Systems, Basement Draining, Heavy Duty Sump/Dewatering The features and benefits of the PE Series: • Maximum solid size: 1/2” • Discharge size: 1 & 1/2” • Maximum capacity: 53 GPM pe31 61 GPM pe41 25 GPM pe51 70 gpm 37 feet • Maximum total head: 25’ pe31 25’ pe41 25’ pe51 70 gpm 37 TDH •Automatic and manual model available •Includes a 20’ power cord As one of the leading Goulds Pump Dealers, the variety of Goulds PE Series pumps that we stock include the following specifications The pe31 has: 1/3 HP at 3000 RPM, 115 volts, and shade pole design The pe41 has 2/5th HP and 3400 RPM, in 115 and 230 volts with a PSC design The pe51 has: ½ HP at 3400 RPM in 115 and 230 volts with a PSC design •Single phase •Class B insulation •Oil-filled Design